FEA

FEA

Finite Element Analysis (FEA)

Finite Element Analysis (FEA) finds solution by subdividing large problem into finite element. The system assembles the finite element & then models the entire problem. Idea metrics is a leader in (FEA) techniques to the design of equipment. We Executed number of projects for Finite Element Analysis (FEA) based reports validating product safety or illustrating shortcomings. Our reports are in compliance with design standards and can be made to comply with the several different registration guidelines.

Fatigue Analysis | Fatigue Stress Analysis | FEA Fatigue Analysis
Structural-Analysis
Thermal-Analysis
Coupled Analysis
Fitness for service
Failure Analysis | Root Cause Failure | Failure Analysis Services
Mounded-Bullet-FEA
Creep Analysis
Buckling Analysis With Finite Element Analysis(FEA) | Ideametrics

Fatigue Analysis

A fatigue life evaluation shall be performed if the component is subject to operations involving cyclic loadings. The evaluation for fatigue is made on the basis of the number of applied cycles of a stress or strain range at a point in the component.

Structural Analysis

Structural analysis is carried out for a vessel or vessel component for following cases:- Structural loads on the components may lead to loss of structural integrity and the design needs to be checked for the same.

Thermal Analysis

Components such as heat exchangers, high temperature reactors operate with considerable thermal loads. Many times the thermal state of the component is required to study the effects of temperature on the design of the component.

Coupled Analysis

Components such as heat exchangers, high temperature reactors operate with considerable thermal loads. Many times the thermal state of the component is required to study the effects of temperature on the design of the component.

Fitness for Service

Ideametrics has extensive experience and expertise in the field of Fitness-For-Service. We have performed evaluations for all of the damage mechanisms covered in ASME FFS-1/API 579 for clients around the world.

Failure Analysis

Ideametrics help in finding the basic root cause of failure in the process which leads to the failure of the process equipment. We have helped many of our client to find out the basic root cause failure in the heat exchanger or pressure or any other process equipment.

Mounded Bullet FEA

Our services include Finite Element Analysis of Mounded Bullets as per ASME standards. We perform Finite Element Analysis of mounded Bullet as per designed and client standards.

Creep Analysis

Our services include Creep Analysis of reactors. Ideametrics can perform creep analysis of equipment as per Fitness-For-Service standard API-579-1/ASME-FFS-1 MPC omega method.

Buckling Analysis

Buckling analysis needs to be done for protection against collapse from buckling to avoid buckling of components with a compressive stress field under applied design loads.

We would love to hear from you!

Depending upon your requirement, you can either chat live with our support person (click on the live chat button bottom right corner), or drop a message here.